patch in bottom of door

almost done with the welding....

right side lower 1/4 panel

patch tacked in, ready for full weld

after grinding.... ready for skim coat of filler

large rust area....

This is what we found once the upper cowl was removed.

close-up

Here the rust was cut out and a new panel fabricated.

Flange welded around to seal out water.

Cleaned with acid, seam sealed and ready for paint.

Heavy coat of rust protection.

Tacked in place

Fully welded

Ground smooth

First coat of paint

Repairs to small rust holes in left 1/4 panel

Hood scoop